In the use of wheel repair equipment, the price of tires is relatively expensive, so pay special attention to the maintenance of car tires for wheel repair equipment.
1. Keep the distance between the vehicles at high speed to avoid unnecessary or frequent braking, which can reduce damage to the tires. For the sake of your own driving safety, pay attention to the pattern depth of the tire. The tire that is close to the flattened tire has a long braking distance because of the friction with the road surface. Do not drive at a high speed.
2. There is a one-to-one correspondence between the load of the tire and the air pressure. If the load is too high, it is similar to the low air pressure, which will cause damage to the tire. It is often used under overload and the service life of the tire will be reduced by 20%-50%. Incorrect loading can also result in uneven tire loading, which can affect the excessively long life of individual tire loads.
3. Air pressure is the life of the tire. The inflation pressure of the tire must conform to the air pressure specified by the national standard for different types and specifications of tires. Always check the air pressure of the tire. If the air pressure is too high or too low, it will cause abnormal wear on the tire, crack at the bottom of the groove, break of the cord, delamination of the ply, tire blasting, etc. If it is to continue at high speed, the air pressure should be at the standard pressure. Increase the 5% to 10%; at the same time, the tire will rise due to the temperature rise after the tire is running, and the air cannot be deflated at this time.
4. It is necessary to properly change the tires on the vehicle with the wheel repair equipment in a timely manner, and insist on checking the tires during the primary maintenance and secondary maintenance of the vehicle, keeping the tires wear evenly and prolonging the service life; in addition, the tires with slightly larger outer diameters It should be installed on the outer wheel.
5. Do not use the refurbished tires on the front wheels; use the vertical line pattern tires on the front wheels and the horizontal lines on the rear wheels.
6. The wheel repair equipment wears to the wear mark and must be exchanged.
Due to the different distribution loads of the front and rear axles, the difference between the drive wheels and the driven wheels, and the difference in road surface conditions, the wear conditions of the individual tires of the vehicle are different. In order to obtain better tire wear conditions, regular tire shifting is a good solution. The relocation of the tires is clearly guided in the car manual provided by the car manufacturer. Under normal circumstances, it is recommended that the front-wheel drive vehicles perform a transposition every 8000~10000km, while the four-wheel drive vehicle is recommended to be transposed at 6000km. If the spare tire is the same size as the other wheels, it can also participate in the shift.

Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn

Leave a Reply

Your email address will not be published. Required fields are marked *