Diamond cut wheel machine is specially designed for diamond cutting equipment, cutting speed, high production efficiency, small loss, its simple software operation efficient and time-saving. With its contact-free cutting method resulting in cutting efficiency and raw stone loss, the advanced 532 nanometer laser provides higher speed and accuracy than conventional infrared lasers, while achieving extremely low maintenance rate.
Significant advantages of diamond cut wheel machine:
1. High accuracy: positioning accuracy 0.05mm, repeat positioning accuracy 0.02mm

2. Slit narrow: The laser beam is focused into a very small point of light, so that the focal point reaches a very high power density, the material is quickly heated to the degree of gasification, evaporation to form holes. With the relative linear movement of the beam and the material, the holes continuously form a slit with very narrow width. The notch width is generally 0.10 ~ 0.20mm.

3. Smooth cutting surface: The cutting surface has no burrs, and the roughness of the cutting surface is generally controlled within Ra12.5.

4. High speed: cutting speed up to 10m/min, positioning speed up to 70m/min, much faster than line cutting speed.

5. Good cutting quality: non-contact cutting, little heat influence on the cutting edge, basically no thermal deformation of the workpiece, completely avoid the collapse of the edge formed during the material punching and shearing, generally do not need secondary processing.

6. No damage to the workpiece: the laser cutting head will not contact with the surface of the material, to ensure that it will not scratch the workpiece.

7. Not affected by the hardness of the material to be cut: laser can be steel, stainless steel, aluminum alloy plate, hard alloy, etc., processing, no matter what kind of hardness, can be deformation-free cutting.

8. Not affected by the shape of the workpiece: laser processing flexibility is good, can process any graphics, can cut pipe and other profiles.

9. Can be non-metallic cutting processing: such as plastic, wood, PVC, leather, textiles, plexiglass, etc.

10. Save mold investment: laser processing does not need mold, no mold consumption, no need to repair mold, save mold replacement time, thus saving processing costs, reduce production costs, especially suitable for the processing of large products.

11. Material saving: using computer programming, can be different shape of the product of the whole board material set, to improve the use rate of materials.

12. Improve the speed of new product development: after the product drawing is formed, laser processing can be carried out immediately to get the new product in a short time.

Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn

Leave a Reply

Your email address will not be published. Required fields are marked *