The CNC wheel lathe machine automatically processes the wheel in accordance with the pre-programmed processing program. It is mainly used for cutting inner and outer cylindrical surfaces of shaft parts or disc parts, inner and outer conical surfaces with arbitrary cone angles, complex rotating inner and outer curved surfaces, cylinders, and conical threads. It can also perform grooving, drilling, reaming, and reaming. Hole and boring etc.
The servo system of the CNC wheel lathe machine is the electric transmission link between the CNC system and the machine tool body, which is mainly composed of a servo motor, a drive control system and a position detection feedback device. The servo motor is the executive component of the system, and the drive control system is the power source of the servo motor. The command signal sent by the CNC system is compared with the position feedback signal and used as a displacement command. After the power of the drive system is amplified, the moving parts of the machine tool are driven to perform precise positioning or move according to the specified trajectory and feed speed, so that the machine tool can be processed to meet the drawing requirements Parts.
Three taboos in the operation of cnc wheel lathe machine:
L. It is forbidden to touch the tip of the knife and iron filings by hand, and the iron filings must be cleaned with iron hooks or brushes;
2. It is forbidden to touch the rotating spindle, workpiece or other moving parts by hand or in any other way;
3. It is forbidden to move or change speed during processing, and it is not allowed to wipe the workpiece with cotton thread, nor to clean the machine tool.

Share on FacebookShare on Google+Tweet about this on TwitterShare on LinkedIn

Leave a Reply

Your email address will not be published. Required fields are marked *